Siding Installation Redding, CA

Fiber cement siding in Redding, CA generally runs $12 to $20 per square foot installed, which puts a typical 1,500 square foot wall area at roughly $18,000 to $30,000. Engineered wood lands in a similar range, and vinyl runs lower at $8 to $14 per square foot.

Tear-off of existing siding adds about $1 to $2 per square foot, and permits for a siding replacement generally run $200 to $1,500 depending on jurisdiction and project value.

Dry rot repair is priced separately because nobody knows the extent until the walls are open. We carry an allowance for it in the estimate and document anything we find.

Fiber cement is the most common recommendation for Redding, CA. It does not fade or warp under sustained UV, it resists termites, it is dimensionally stable through big temperature swings, and it is noncombustible.

Engineered wood is lighter and easier to work with, and it costs slightly less, though it needs more attention at cut edges and ground clearance. Vinyl is the budget option but can become brittle and fade with years of direct sun exposure here.

We price two materials on most estimates so you can compare upfront cost against lifespan. Contact us and we will bring samples.

Usually yes for a full replacement, since it involves the building envelope and weather barrier. Small repairs to a limited area often do not require one.

City of Redding properties go through the city building division, and parcels in unincorporated Shasta County go through the county. Parcels in designated fire zones have additional material requirements.

We confirm the requirements for your address and pull the permit as part of the project.

We stop, show you, and price the repair before covering anything. Rotted sheathing and framing have to be cut out and replaced, not sealed over.

Typical repairs run a few hundred dollars for an isolated section to several thousand if a wall base or window area is involved. We photograph what we find so the change order is documented.

This is why our estimates include a repair allowance. It keeps the surprise financial rather than structural.

A single story home of 1,500 to 2,000 square feet of wall area typically takes 1 to 2 weeks. Two story homes and houses with complex rooflines, dormers, or many windows run 2 to 4 weeks.

Dry rot repairs add days depending on what we uncover. Material lead time for fiber cement in specific profiles or colors can add 1 to 3 weeks before the start date.

We schedule exterior work around the rainy season when we can, since November through March slows outdoor progress here.